Sans Digital Towerraid TR4UTP Manual do Utilizador descarregar pdf (Página 12)

• Power OFF: Push and hold power switch more than 3 secends to switch off the power.

3.4 INSTALLING eSATA HOST BUS ADAPTER HARDWARE

Follow the instruction below for eSATA HBA installation:

1. Turn off your host computer.

2. Install the eSATA HBA into a PCI-Express slot (1X ~ 16X)

3. Connect one end of the eSATA cable to the eSATA connector on the eSATA HBA.

4. Connect the other end to the eSATA connecter on SANS DIGITAL TR4M.

5. If hard disk drives are not installed in SANS DIGITAL TR4M, insert the drives into bay 1 to 4 in order, counting from

the bottom to top. Gently push the drive until the drive is fully inserted, and twist the tool-less screw seat the drive

securely.

6. Switch the VAC to the correct position (For example, 115 for Japan, and 230 for UK), and attach one end of the AC

power cord to SANS DIGITAL TR4M and the other end to the proper AC outlet.

7. Turn on SANS DIGITAL TR4M, and then turn on the host computer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 84 85

Sem comentários

Sans Digital Towerraid TR4UTP Manual do Utilizador Página 12