Sans Digital Towerraid TR4UT-B Manual do Utilizador descarregar pdf (Página 20)

3. The following message then appears: “Safe to Remove Hardware”. You can now safely disconnect the device

from your computer.

Note: If your host USB adapter does not support this feature, the device should be disabled using the Device

Manager or your system should be shut down cleanly and powered off before disconnecting the USB device.

4.3.2 MACINTOSH SYSTEMS

You must un-mount the hard disk drive by dragging the hard drive icon to the trash before disconnecting it or

powering it down.

4.4 HARD DISK DRIVE HOT-PLUG & HOT-UNPLUG

The hard disk drives should not be hot-plugged, but unless RAID failure. To avoid data corruption or loss, care should be

taken to ensure that the host system is not currently using any drive that is about to be hot-unplugged.

4.5 LED INDICATIVE STATUS

The TowerRAID TR4UT/TR4UT-B provides information on the SATA HDDs, PC Link, and Power LEDs.

Each LED activity will turn On/Off the LED for approximately 70 ms. The blinking rate is approximately 400 ms On and

400 ms Off.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Sem comentários

Sans Digital Towerraid TR4UT-B Manual do Utilizador Página 20