Sans Digital iSCSI STORAGE Manual do Utilizador descarregar pdf (Página 23)

- 23 -

Figure 3.5.2.2

(Figure 3.5.2.2: ER104I+(B), ER208I+(B), ER316I+B and TR8I-B, there are 2 iSCSI data ports. Each of

them is set to static IP.)

IP settings:

User can change IP address by moving mouse to the gray button of LAN port, click “IP settings for iSCSI

ports”. There are 2 selections, DHCP (Get IP address from DHCP server) or static IP.

Figure 3.5.2.4

Default gateway:

Default gateway can be changed by moving mouse to the gray button of LAN port, click “Become default

gateway”. There is only one default gateway.

MTU / Jumbo frame:

MTU (Maximum Transmission Unit) size can be enabled by moving mouse to the gray button of LAN port,

click “Enable jumbo frame”.

Multi-homed / Trunking / LACP (ER316I+B only):

The following is the description of multi-homed / trunking / LACP functions.

Multi-homed: Default mode. Each of iSCSI data port is connected by itself and is not link aggregation and

trunking. This function is also for Multipath functions. Select this mode can also remove the setting of

Trunking / LACP in same time.

Caution

The MTU size of switching hub and HBA on host must be enabled. Otherwise, the LAN

connection can not work properly.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Sem comentários

Sans Digital iSCSI STORAGE Manual do Utilizador Página 23